15km 30km લાંબા અંતરની વાયરલેસ વિડીયો ટ્રાન્સમીટર રીસીવર ટ્રાન્સમિશન ટ્રાન્સસીવર
15km 30km 80km 150km long-distance wireless video transmitter-receiver transmission transceiver
સામગ્રીનું કોષ્ટક
વેચાણ પોઇંટ્સ / વિશેષતા / ફાયદો
સિગ્નલ સ્ટ્રેન્થ
Receiver screen can show the signal strength of the transmitter, વપરાશકર્તાઓ વધુ સારી રીતે સ્વાગત સ્થળ ખસેડી શકે છે.
વિડિઓ + ડેટા + નિયંત્રણ
Except for video, it also supports two-way transfer of data and control commands via the UART between the transmitter and the receiver.
નિમ્ન લેટન્સી
પ્રાપ્તકર્તાના કમ્પ્યુટર સ્ક્રીન સ્નેપમાંથી, આપણે જોઈ શકીએ છીએ કે વર્તમાન ટ્રાન્સમિશન લેટન્સી/વિલંબ 28-76ms છે (મિલિસેકન્ડ). વિગતો
બેન્ડવિડ્થ પ્રીસેટેબલ
ટ્રાન્સમિશન બેન્ડવિડ્થ 3M પર પ્રસ્તુત કરી શકાય છે, 5એમ, 10એમ, અને 20M. વિગતો 10-15-20એમબીપીએસ
TX RX ટ્રાન્સસીવર પર બે એન્ટેના
ટ્રાન્સસીવર મોડ માટે ANT1, મોડ પ્રાપ્ત કરવા માટે ANT2
પેકેજમાં સંપૂર્ણ સેટ
પેકેજ ટ્રાન્સમીટર સહિત છે, રીસીવર, બંને બાજુ એન્ટેના અને એસેસરીઝ કેબલ. ચિત્ર
- પર આધારિત છે OFDM ટેકનોલોજી, વેબ કેમેરા (ઇથરનેટ સાથે એચડી કેમેરા) ભલામણ કરવામાં આવે છે.
- દ્વિમાર્ગી બ્રોડબેન્ડ વાયરલેસ લિંક સાધનો (The receiver can get the audio-video download, તે રીસીવર પર ડેટા પણ અપલોડ કરી શકે છે)
- ઈન્ટરફેસ: 2એક્સ ઇથરનેટ પોર્ટ, 3X RS232 સીરીયલ પોર્ટ, ઓડિયો ઇનપુટ-આઉટપુટ (વધુ નિયંત્રણ કામગીરી) જો તમારો કેમેરા HDMI આઉટપુટ છે, પછી તેને વધારાના એન્કોડર ઉપકરણની જરૂર છે, જે આ ટ્રાન્સમીટરમાં HDMI વિડીયો અને ઓડિયો સિગ્નલને ડિજિટલ ડેટામાં એન્કોડ કરી શકે છે. રીસીવર પર, તે તમારા કમ્પ્યુટર અથવા NVR ને સીધા જ કનેક્ટ કરી શકે છે, જો તમને HDMI મોનિટરમાં આઉટપુટની જરૂર હોય, પછી તેને ડિજિટલ ડેટાને HDMI વિડિયો અને ઓડિયો સિગ્નલ પર એન્કોડ કરવા માટે વધારાના ડીકોડર ઉપકરણની પણ જરૂર છે.
- Default Data Interface is RS232, We also can modify it to TTL, Sbus, or RS485, please contact us if you need to know how to connect it to your flight controller, દાખ્લા તરીકે, Pix hawk 4.
- Data Port Baud Rate: ડેટા પોર્ટ 1 ને સપોર્ટ 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800; ડેટા પોર્ટ 2 and Data Port 3 આધાર 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
- ડ્યુઅલ એન્ટેના: The SMA connector ANT1 main antenna works in transceiver mode, ANT2 સહાયક એન્ટેના રીસીવ મોડમાં કામ કરે છે.
- વાયરલેસ વર્કિંગ ફ્રીક્વન્સી બેન્ડ: 1427.9~ 1447.9MHz (1.4જી) અથવા 806 ~ 826MHz (800મેગાહર્ટઝ), or optional 2401.5~ 2481.5MHz (2.4જી) ફ્રીક્વન્સી બેન્ડમાં hopping આપોઆપ આવર્તન આધાર (default working frequency is 1.4G)
- વાયરલેસ બેન્ડવિડ્થ: 3મેગાહર્ટઝ, 5મેગાહર્ટઝ, 10મેગાહર્ટઝ, 20મેગાહર્ટઝ, બધા ગાંઠો કાર્યકારી બેન્ડવિડ્થ શેર કરે છે, અને સિસ્ટમનો મહત્તમ શેરિંગ દર 30Mbps છે.
- મોડ્યુલેશન સ્થિતિ: QPSK / QAM16 / QAM64 આપોઆપ અનુકૂલન.
- નેટવર્કિંગ મોડ: બિંદુ થી બિંદુ, point-to-multi-point star network. (દાખ્લા તરીકે, 6 cameras and a transmitter to one receiver.)
- વાયરલેસ ટ્રાન્સમિટિંગ પાવર: 10ડબલ્યુ.
- નોડ પ્રાપ્ત કરતી સંવેદનશીલતા: -103 10MHz બેન્ડવિડ્થ પર.
- આધાર AES128 એન્ક્રિપ્શન અને ડિક્રિપ્શન.
- ટ્રાન્સમિશન અંતર: 15km/30km/80km/150km વૈકલ્પિક.
- દ્વારા ઉપકરણ રૂપરેખાંકન અને વાયરલેસ કાર્યકારી સ્થિતિ જોઈ શકાય છે વેબ UI of the network port or the serial port.
- 2W PA: DC12~16V, 33dBm, વિડિઓ ટ્રાન્સમીટરનો સરેરાશ પાવર વપરાશ 12W કરતા ઓછો છે, and the average power consumption of the video receiver is less than 10W. (પીળો પાવર કનેક્ટર XT30PW છે / XT60PW) (Without Any external PA, the module has 300mW, 25dBm)
5W PA: DC24~25V, 37dBm, વિડિઓ ટ્રાન્સમીટરનો સરેરાશ પાવર વપરાશ 22W કરતા ઓછો છે, અને વિડિયો રીસીવરનો સરેરાશ પાવર વપરાશ 16W કરતા ઓછો છે.
10W PA: ડીસી 24 ~ 30 વી, 40-41dBm, 28વી પાવર સપ્લાયની ભલામણ કરવામાં આવે છે, મહત્તમ સરેરાશ વીજ વપરાશ 1.4A@28V કરતા ઓછો છે, અને તાત્કાલિક ટોચની વીજ પુરવઠો જરૂરિયાત 2.8A@28V સુધી પહોંચી શકે છે. - માપ: 124*67.8*28.5એમએમ (શેલમાંથી વિસ્તરેલ કનેક્ટરને બાદ કરતા, વગેરે).
- વજન: 0.3ડબલ્યુ 133 ગ્રામ, 2ડબલ્યુ 142 ગ્રામ, 5W 142grams, 10ડબલ્યુ 242.5 ગ્રામ
ઇનપુટ આઉટપુટ
વૈકલ્પિક અંતર ગ્રેડ | વર્ણન |
ઇથરનેટ 1 | 4PIN ZH1.5mm connector bridged with Ethernet2 |
ઇથરનેટ 2 | RJ45 connector bridged with Ethernet1 |
વૈકલ્પિક અંતર ગ્રેડ | 9PIN ZH1.5mm કનેક્ટર, 3 વૈકલ્પિક અંતર ગ્રેડ |
વૈકલ્પિક અંતર ગ્રેડ | 4PIN ZH1.5mm કનેક્ટર, વૈકલ્પિક અંતર ગ્રેડ |
વૈકલ્પિક RS232 | વૈકલ્પિક RS232 |
વૈકલ્પિક અંતર ગ્રેડ | TX/RX Antenna port, એસએમએ સ્ત્રી |
વૈકલ્પિક અંતર ગ્રેડ | વૈકલ્પિક અંતર ગ્રેડ, એસએમએ સ્ત્રી |
પાવર એલઇડી | The red light on normally powered |
નોડ એલઇડી | Blue light for Node type indicator |
લિંક એલઇડી | Green light, wireless link working status indicator |
પ્રસારણ પદ્ધતિ
જુઓ વેબ UI ગોઠવણી વિગતો
2W 27km ટેસ્ટ ટ્રાન્સમીટર અને રીસીવર નકશો
FAQs
આ ટ્રાન્સમીટર અને બેટરી બંનેનો પાવર સપ્લાય છે 3A@28V. સામાન્ય સમયે, અમે પરીક્ષણ માટે ઉપયોગમાં લીધેલી બેટરી 7AH છે, તે 2 ~ 4 કલાક કામ કરી શકે છે. જો તમે 15AH ચાર્જેબલ બેટરી ખરીદો છો, તે લગભગ 4 ~ 8 કલાક સુધી સતત કામ કરી શકે છે.
વેબ UI પેરામીટર પર આવર્તનને સરળતાથી સ્વિચ કરો એટલું જ નહીં, આવર્તન બદલ્યા પછી, તેને અંદર પાવર એમ્પ્લીફાયર અને તે જ ફ્રીક્વન્સી ટ્રાન્સમીટર અને રીસીવર એન્ટેના બદલવાની પણ જરૂર છે. તેથી ખરીદનારને ડિલિવરી પહેલાં તમારે કઈ આવર્તનની જરૂર છે તેની પુષ્ટિ કરવી જોઈએ. એન્ટેના આ આવર્તન અનુસાર કસ્ટમાઇઝ્ડ છે.
આરએફ કેબલ અંગે, અમારું એન્જિનિયર ભલામણ કરતું નથી કે તમે આટલા લાંબા સમય સુધી તેનો ઉપયોગ કરો. એક મીટર RF કેબલ માટે 0.5dB ઘટાડો થશે. માટે 3 મીટર આરએફ કેબલ, સિગ્નલ સ્ટ્રેન્થ 1.5dB દ્વારા ઘટાડવામાં આવશે.
લાંબા અંતરને ટેકો આપવા માટે, તે વધુ સારું છે કે તમે આરએફ કેબલનો ઉપયોગ ઓછો કરો 1 મીટર?
હકિકતમાં, ટ્રાન્સમીટર ખૂબ નાનું છે, ટ્રાન્સમીટરથી ટ્રાન્સમીટર એન્ટેના સુધી થોડું અંતર રાખવું વધુ સારું છે. કેમેરાથી ટ્રાન્સમીટર સુધી ટ્રાન્સમીટર અને ઈથરનેટ કેબલ માટે પાવર સપ્લાય કેબલ લાંબી હોઈ શકે છે કારણ કે RF કેબલ જેવી કોઈ ખોટ નથી.
હા, ડિફૉલ્ટ વિડિયો ઇનપુટ IP RJ45 ઇથરનેટ પોર્ટ છે, જો તમારી કેમેરા HDMI અથવા SDI અથવા AHD છે, આ સમસ્યાને ઉકેલવા માટે ફક્ત એક નાનું એન્કોડર બોક્સ. કૃપા કરીને નીચેનું મોડેલ તપાસો.
- જો તમારા વિસ્તારમાં DVB-T અથવા DVB-T2 ડિજિટલ ટેલિવિઝન સિગ્નલ છે, આ ટીવી ફ્રીક્વન્સી રેન્જ 170-860Mhz છે, તેમાં 800Mhz નો સમાવેશ થાય છે, તેથી 1.4G પસંદ કરો તે વધુ સારું છે.
- કારણ કે જીપીએસ એન્ટેના જીપીએસ સિગ્નલ મેળવે છે અને ડ્રોન પર જીપીએસની દિશા ઉપર હોય છે, અમારું ટ્રાન્સમીટર એન્ટેના જમીન પર સિગ્નલ મોકલવા માટે નીચે તરફ નિર્દેશ કરે છે. પરિણામ સ્વરૂપ, GPS પર 1.4G આવર્તન અસર નહિવત છે.
પેકેજ કદ છે 125 એક્સ 23 x 11 સેમી. સરેરાશ વજન:3.72કિલો ગ્રામ, વોલ્યુમ વજન:7.5કિલો ગ્રામ
અહીં સંપૂર્ણ સેટ ચિત્ર છે.
આવર્તન હોપિંગ અંગે, એન્જિનિયર પાસે તમારા માટે કેટલાક સૂચનો છે.
- જેમ કે સિસ્ટમ ફ્રીક્વન્સી રેન્જ 20Mb છે, જો તમારી બેન્ડવિડ્થ 20Mb પસંદ કરેલ છે, પછી તે હોપ કરી શકતા નથી (માત્ર એક બિંદુ). જો બેન્ડવિડ્થ 10Mb પસંદ કરેલ હોય, પછી તમારી પાસે બે પોઈન્ટ છે, જો બેન્ડવિડ્થ 5Mb પસંદ કરેલ હોય, પછી તમારી પાસે છે 4 હોપ માટે નિર્દેશ કરે છે.
- જો 1410Mhz જામ થઈ ગયું હોય, પછી 1420Mhz પણ જામ થઈ ગયું છે, કારણ કે આવર્તન ખૂબ નજીક છે.
- જ્યારે hopping આવર્તન, ડેટા અથવા વિડિયો ટ્રાન્સમિશન ડિસ્કનેક્ટ થઈ જશે, અને તમારી વિડિઓ સ્થિર થઈ જશે.
- સામાન્ય સમયે, હોપિંગ નથી પસંદ કરવાનું વધુ સારું છે.
- જો તમારું ટ્રાન્સમિશન અંતર 15~22km કરતાં ઓછું હોય, પછી અમારી પાસે પસંદગી માટે બીજો વિકલ્પ છે, આવર્તન 110Mb છે, અને જો તમે 20Mb બેન્ડવિડ્થ પસંદ કરો તો પણ, તે છે 5 ફ્રીક્વન્સી હોપિંગ માટે પસંદ કરવા માટેના પોઈન્ટ.
જો તમારે S.bus ને સપોર્ટ કરવાની જરૂર હોય, પછી કૃપા કરીને શિપમેન્ટ પહેલાં અમને કહો, અને અમે અમારા RS232 ને TTL માં સંશોધિત કરીશું.
અમારા TX900માં ત્રણ RS232 પોર્ટ છે. જો તમને S.bus ને સપોર્ટ કરવા માટે તેની જરૂર હોય, ફક્ત S.BUS થી RS232 સુધીના એક નાના કન્વર્ટરની જરૂર છે ઠીક છે. ( મિની SBUS કન્વર્ઝન મોડ્યુલ Uart થી Sbus, Uart માટે Sbus ).
Please tell us if you need sbus port before delivery. Our engineer will modify the D2 port from RS232 to Sbus.
RSSI wireless link status data requires customers (such as flight controllers) to manually send AT commands to obtain it. It can be obtained in two ways:
- Configure UART3 (data port 3rd) as an AT command serial port, and then send AT commands through UART3 (D3) to obtain. https://ivcan.com/change-d3-from-transparent-serial-port-to-at-command/
- Update the firmware version 1.5.1 અથવા ઉપરના, so that there will be an additional TCP server inside for customers to access through TCP to send AT commands to obtain the wireless status.
- The LED light is used to indicate the wireless connection status (દાખ્લા તરીકે, if the wireless link is disconnected, the light will go out), and there is no dedicated external pin to notify the customer flight control.
Or see the UART AT command list અહીં.
or see https://ivcan.com/how-to-get-the-rssi-and-snr-on-the-drone-transmitter/
- અમારા વાયરલેસ વિડિયો ટ્રાન્સમિશનનો સીરીયલ પોર્ટ પારદર્શક છે, અને ફ્લાઇટ કંટ્રોલરને સક્રિય રીતે કોઈ ડેટા મોકલવામાં આવતો નથી. આ ગ્રાઉન્ડ સ્ટેશન દ્વારા નિયંત્રિત થાય છે.
- તે failsafe આદેશ મોકલશે નહીં, પરંતુ તમે સિગ્નલ સૂચકમાંથી લિંક સ્ટેટસ લાઇટ જોઈ શકો છો.
- અહીં લિંક સ્ટેટસ સિગ્નલ સ્ટ્રેન્થ ઈન્ડિકેટરનો અર્થ છે
- તેજસ્વી નથી: સૂચવે છે કે મોડ્યુલની વાયરલેસ લિંક જોડાયેલ નથી
- લાલ: સૂચવે છે કે મોડ્યુલની વાયરલેસ લિંક જોડાયેલ છે, પરંતુ વાયરલેસ સિગ્નલ સ્ટ્રેન્થ ખૂબ જ નબળી છે
- નારંગી: સૂચવે છે કે મોડ્યુલની વાયરલેસ લિંક જોડાયેલ છે, અને વાયરલેસ સિગ્નલની શક્તિ મધ્યમ છે
- લીલા: સૂચવે છે કે મોડ્યુલની વાયરલેસ લિંક જોડાયેલ છે, અને વાયરલેસ સિગ્નલ સ્ટ્રેન્થ ખૂબ જ મજબૂત છે
- અમે સમજીએ છીએ કે તમને આ કાર્યની આશા છે, જો એરક્રાફ્ટ ફ્લાઇટ દરમિયાન સિગ્નલ ગુમાવે છે તો તે ઘરે પરત નહીં આવે કારણ કે ફ્લાઇટ કંટ્રોલર સમજી શકશે નહીં કે આરસી લિંક ખોવાઈ ગઈ છે..
- તમારે લિંક સ્ટેટસ LED લાઇટ જોવાની જરૂર છે, જો તે નારંગી અથવા લાલ હોય, તમારે પ્લેનને અગાઉથી નિયંત્રિત કરવું જોઈએ.
- તમે નીચેની વિન્ડો પર RSSI પણ મેળવી શકો છો
કૃપા કરીને અપગ્રેડ ફર્મવેર સેટપ્સ તપાસો, નીચેની લિંક પર નવીનતમ અપગ્રેડ ફર્મવેર ડાઉનલોડ કરો.
https://ivcan.com/how-to-upgrade-the-latest-firmware-of-the-wireless-video-transmitter-and-receiver
સામાન્ય વપરાશ પર, ટ્રાન્સમીટર તરીકે એક નોડ, રીસીવર તરીકે અન્ય નોડ. જો તમારે લાંબી રેન્જ અથવા પર્વતની ટોચ પર ટેકો આપવાની જરૂર હોય, નીચેના ચિત્રની જેમ, હા, કૃપા કરીને રીએપ્ટર તરીકે 3જી નોર્ડ ખરીદો.
તમારે ફક્ત 3જી નોડને મધ્યમાં મૂકવાની જરૂર છે અને 3જી નોડને 2D3U તરીકે સેટ કરવાની જરૂર છે પછી ઠીક છે.
3જી નોડ 2D3U કેવી રીતે સેટ કરવી?
AT આદેશ સાથે સેટ કરો:
at+cfun=0
^dstc=0 પર
at+cfun=1
ઓપરેશન પછી લિંક ઉપકરણને પુનઃપ્રારંભ કરો
વેબ UI પેરામીટર મેનેજમેન્ટ પેજ અને ડીબગ વિભાગ પર,
એટી આદેશ
ઇનપુટ AT^DGMR?
જો તમને પરિણામ મળે છે 6602, પછી તે છે 15કિ.મી. આવૃત્તિ.
જો તમને પરિણામ મળે છે 6603, પછી તે છે 30કિ.મી. આવૃત્તિ.
4K વિડિયો સપોર્ટેડ છે.
4K વિડિયો સ્ટ્રીમમાં સામાન્ય રીતે 8Mbps કરતાં વધુ હોય છે, અને 1080P વિડિઓમાં સામાન્ય રીતે 2M કરતાં વધુ હોય છે, તેથી 4K વિડિયો ટ્રાન્સમિટ કરતી વખતે અમારા વાયરલેસ વિડિયો ટ્રાન્સમિશનનું અંતર 1080P કરતા ઓછું હશે.
એક શબ્દમાં, વિડિઓની વ્યાખ્યા જેટલી વધારે છે, ટ્રાન્સમિશન અંતર જેટલું ઓછું છે.
વિડિયો કમ્પ્રેશન નાનું છે, અને ટ્રાન્સમિશન અંતર વધુ દૂર સપોર્ટેડ છે.
In the process of video transmission, if there is data loss, the picture will appear mosaic or stagnation, freeze and other phenomena.
There will be a limited number of retransmissions at the wireless link level (અલબત્ત, data errors will also occur if the situation is not good). The upper-layer application on the end will not be aware of it, nor will it ask the sender to retransmit.
If the signal of the wireless link is not good at a certain point after the distance is extended, and there are always bit errors, it is impossible to design it to be retransmitted all the time, so that the end user experience will be very poor.
The wireless link layer has a limited retransmission mechanism. We have tested the tcp protocol for transmission at the video transmission layer (trying to retransmit on the upper layer through the tcp protocol), but the test found that there is no obvious improvement, and it will also lead to uncontrollable delays.
- The heat generated by the aircraft side is much larger than that of the ground side. If the fan is running, check whether the air inlet and outlet of the lower fan (the positions of the heat sinks at both ends) are blocked
- Try changing the power supply of the air unit transmitter from 24V to 12~18V (the transmit power will be reduced to about 35~36DB)
- Slightly reduce the transmit power of the aircraft by the below AT commands: AT^DSSMTP="23" Reboot after setting
પ્રશ્ન: Are these settings maximum power of the module? (24 dBm)
જવાબ: 24dBm is the maximum output power of the link Module, and the gain of the PA (about 14dBm) needs to be added. The actual transmission power after the 24V power supply PA output is about 38dBm.
# |
Procurement Specifications |
YesNo |
નોંધો |
1 |
The unit shall operate in the VHF BAND and UHF band with its RF transmissions. |
UHF |
1427.9-1467.9મેગાહર્ટઝ |
2 |
The unit shall have an RF output power of 27 dBm or more. |
હા |
2W 33dBm 5W 37dBm 10W 40-41dBm |
3 |
The unit shall provide Serial (દ્વિપક્ષીય, Fullduplex) as data interface. (RS232 or RS422) |
હા |
RS232 bidirectional full duplex |
4 |
The unit power consumption shall not exceed 25W. |
હા |
<22ડબલ્યુ |
5 |
The unit mass shall not exceed 250 ગ્રામ.
|
હા |
<150 ગ્રામ (142ગ્રામ) |
6 |
The unit shall have a data rate of at least 4.8 વિડિઓ ફોર્મેટ્સ |
હા |
RS232:>50kBps ઇથરનેટ:>2M Bps |
Lead time: 10 days for small quantity order.
HS code: 8517629900
The difference between the air unit (ટ્રાન્સમીટર) and ground unit (રીસીવર) is two points:
One is the device type: Air unit (ટ્રાન્સમીટર) is the access node and the ground unit (રીસીવર) is the central node.
Two is the rate ratio of the downlink and up link. Over 30km, the best rate ratio is 4:1 અથવા 3:2.
If you don't want to connect the receiver ethernet cable directly to the computer. Then it is not easy to access the receiver at your local network.
Here is two solutions for you.
1. Add the IP address of the 192.168.1.x network segment on the PC side (the PC can be configured with multiple network segment IP addresses)
2. Modify the IP of the wireless video data receiver from 192.168.1.12 to the address of the 10.220.20.x network segment to meet your local network.
For further questions and solutions, please talk with your local area network workmate or engineer, our receiver is like a computer with IP address, it should keep the network segment IP address at the same, દાખ્લા તરીકે, 192.168.1.xxx.
- હા, there are three solutions to do that.
- TX900 has three data ports. Distinguish through different transparent serial ports, such as D2 to control relay aircraft and D3 to control mission aircraft. The disadvantage is that the TX900 receiver needs to be connected to two serial ports to send instructions separately.
- Use the same transparent serial port to send data in bulk, and then add layer protocols (such as header information) to the data to distinguish which aircraft should receive and process the data. The disadvantage is that the processing of sending and receiving data is complicated.
- Or use two receivers: One receiver is for the mission plane (ટ્રાન્સમીટર), and another receiver is for the repeater drone. The connection and operation are easier.
ડાઉનલોડ & Operation Guide
પર્વતની ટોચથી નવીનતમ પરીક્ષણ વિડિઓ 27 લાંબા અંતરની અસર તપાસવા અને રીસીવર પર કામ કરવા માટે દરિયા કિનારે કિમી દૂર
Optional TX900B for some clients need frequency hopping function.
- TX900B-2W supports the frequency range is 1420~1530MHz, અને ઉપયોગ કરવા માટે 110Mb બેન્ડવિડ્થ છે.
- ગ્રાહક વર્કિંગ બેન્ડવિડ્થને 1.4M/3M/5M/10M/20MHz તરીકે સેટ કરી શકે છે (However 1.4M/3MHz may not be suited for video transmitting). પછી TX900B-2W માં કામ કરી શકે છે FHSS મોડ (ફ્રીક્વન્સી-હોપિંગ સ્પ્રેડ સ્પેક્ટ્રમ) and the central working frequency will be automatically selected by the system and may do frequency hopping (1420~1530MHz વચ્ચે) તેના કામ દરમિયાન.
- ગ્રાહકો સમગ્ર 1420~1530MHz માં આવર્તન ચેનલોનો ઉપયોગ કરવાની યોજના પણ બનાવી શકે છે અને ઉપકરણને નિશ્ચિત આવર્તન ચેનલોમાં પણ કામ કરવા માટે સેટ કરી શકે છે..
- TX900B-2W supports the longest distance at 22km.
- સપોર્ટેડ ફ્રીક્વન્સી રેન્જ અને સૌથી લાંબી અંતર સિવાય, શારીરિક દેખાવ, ઈન્ટરફેસ, UI, કામગીરી, અને તેથી પર, TX900B-2W એ હાલના TX900B-15km-2W જેવું જ છે.
- TX900B-2W only supports a frequency range is 1420~1530MHz, it does not support 800MHz and 2.4GHz frequency ranges.
- ત્યાં બે આવૃત્તિઓ છે, TX900B-2W-15km, અને TX900B-2W-22km.
- As the TX900B-2W frequency range is 110Mb, so if you configure the working bandwidth as 10Mb, પછી તમને મળશે 11 હોપિંગ તરફ નિર્દેશ કરે છે.
- TX900B supports 110Mb bandwidth for frequency hopping and only has three transmission ranges optional, 22કિ.મી., 55કિ.મી., અને 150 કિમી.
ડાઉનલોડ
1 | D3 serial port function configuration |
2 | TX900 transparent transmission and UDP serial port instructions |