mini lightweight 40-60ms pinakamababang latency hdmi encoder at decoder mula sa hdmi hanggang ip at ip sa hdmi para sa drone video data radio link

Talahanayan ng nilalaman
Dimension and Size

Accessory

FAQ
Q: Can I use only the HDMI-to-IP encoder and decode the stream on my computer via RTSP software?
A: Hindi. This encoder and decoder are designed as a paired system using a proprietary protocol to achieve ultra-low latency of 40–60 ms. Standard RTSP software on a PC cannot decode the stream because it does not support this private protocol. To maintain real-time performance and minimal latency, you must use the encoder together with its corresponding IP-to-HDMI decoder.
Q: Does this HDMI encoder and decoder pair module support 4K video?
A: Hindi. Ang HDMI encoder and decoder pair module does not support 4K resolution. It is optimized for mainstream 1080p video at 60 FPS, which provides smooth, high-quality video suitable for drone applications while maintaining ultra-low latency.
Q: What is the typical latency of this HDMI-to-IP and IP to HDMI system?
A: The end-to-end latency is approximately 40–60 ms, making it ideal for real-time drone video transmission and other applications where minimal delay is critical. Please check the below test video and picture.



Q: Does this ultra-low-latency HDMI encoder and decoder have an IP address or a user configuration page?
A: Hindi. To achieve ultra-low latency for IP-based wireless video transmission in drone applications, this system uses a proprietary protocol. It does not require any user configuration or IP address setup. The encoder and decoder are truly plug-and-play: as long as your drone’s airborne and ground transceivers are on the same network segment, the system will automatically detect and configure itself for seamless operation.
Q: Is the system suitable for long-distance drone video transmission?
A: Oo, the lightweight design and low-latency IP transmission make it suitable for drone use. The actual range depends on the quality of your radio link or network infrastructure.
Q: Can I connect multiple decoders to one encoder?
A: Hindi. This system currently supports point-to-point connections only—one encoder pairs with one decoder. Multiple decoders are not supported.



Mga review
May mga walang review pa.