30Km long distance COFDM HDMI Wireless Video Transmitter FAQ
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T
30-150COFDM-908T
Ominaisuus
- pitkälle integroitu, modulaarinen yhdistetty muotoilu
- COFDM-modulointitekniikan avulla, H.264 image coding technology
- Se voi lähettää yhden 1080P HDMI-kanavan (valinnainen SDI) signaali-
- Pienempi viive, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 millisekuntia.
- All-round viestintä, ei pelkää rakennuksen seinien
- Nopea viestintä matkustamisen välillä, the maximum moving speed can reach 600 km / h.
- Lähettimen jäähdytyselementtityyppinen alumiinikotelo, iskunkestävä, Waterproof case is optional.
- Tukee LOS:ää ja näköyhteyttä (NLOS) matkaviestin
- Etäisyys ei ole pienempi kuin 30 kilometriä näköyhteydellä ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- Ääni- ja videosignaalien synkroninen vastaanotto, teräväpiirtoinen HDMI1080P-moniformaatti valinnainen, vakiotarkkuuksisen DVD-kuvanlaatu
- Vastaanotin pystyy toteuttamaan videotallennus- ja varmuuskopiointitoiminnot
- 128-bittinen AES-salaus ja salauksen purku
- Täysi räätälöinti saatavilla
- Upgrade tool: Parameter Configure board
- Käyttää: UAV, Ajoneuvot & UGV
- modulaatio: COFDM
- käyttöjännite: DC11V-DC13V
- työvirta: 0.5~ 2W (riippuen eri PA:sta)
- Lähetysteho: 0.5W~20W optional
Sisällysluettelo
hakemus
Tätä tuotetta käytetään pääasiassa yleisen turvallisuuden ja turvallisuuden tarkastusosastojen tekniseen tiedusteluun ja todisteiden keräämiseen, miehittämättömien ilma-alusten reaaliaikainen kuvansiirto, miehittämättömät alukset, radio- ja televisiorele, radion ja television suoria lähetyksiä: lähetyskenttä, urheiluohjelma, sosiaalinen uutiset, ilma elää, studio, vuorikiipeilyretki, ja muut näkökohdat. Se soveltuu korkealaatuisten kuvien reaaliaikaiseen mobiililähetykseen monimutkaisissa ympäristöissä, kuten kaupunkialueilla, meret, ja vuoret.
Lähettimen tekniset tiedot
modulointimenetelmä | COFDM |
käyttöjännite | DC11V ~ DC13V |
työskentelyvirta | 0.5 Watts: ≤0,6A DC12V, 1 Watts: ≤0,8A DC12V, 2 Watts: ≤1.5A DC12V 5 Watts: ≤3,0A DC12V 10 Watts: ≤5.0A DC12V 20 Watts: ≤7.0A DC12V |
käyttöliittymä | vakiona RS232-liitäntä, 8 Databitit, 1 Salkuun Bit, Pariteettibitti, Siirtonopeus: 19200 |
läpinäkyvä tietoliitäntä, | yksisuuntainen läpinäkyvä sarjaportin lähetys, 8 Databitit, 1 Stop Bit, tukea pariton pariteettia, Pariteettibitti, Langaton pariteetti, Siirtonopeus: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
salausmenetelmät | tukee 128-bittistä salausta |
modulointikartoitus | QPSK (4QAM), 16QAM, 64QAM |
etenevän virheenkorjauksen | 1/2 2/3 3/4 5/6 7/ 8 |
suojavälin | 1/32 1/16 1/8 1/4 |
Operaattorin numero | 2K |
kaistanleveydellä | 2 / 3 / 4 / 5 / 6 / 7 / 8M Säädettävä |
lähetyskoodivirta | 2000kbs ~ 20000 kbs Säädettävä |
Lähetysteho | 0.5 / 1 / 2 / 5 / 10 Watts |
lähetystaajuus | COFDM-908T, Vaihe 1 MHz |
voiman tasaisuus | 10 MHz: n kaistanleveydellä kuin 0,2 dB |
olkapään suhde | lähtöteho 27dB, hartiasuhde on parempi kuin -30dB |
toinen harmoninen | ≤ -45dB |
LISÄÄ | 32Db |
tulovideo | 720×480 60minä(NTSC), 720×576 50minä(PAL), 720 50P, 720 60P, 1080 50minä, 1080 60minä, 1080 24P, 1080 25P, 1080 30P, 1080 50P, eri tilat ovat mukautuvia. |
HD-liitäntä | HDMI, SDI valinnainen |
videon koodausmuoto | H.264 |
suojausstandardi | täysin alumiininen patterityyppinen alusta, anti-korroosio, iskunkestävä muotoilu |
Ulkomitat | 9 x 6.4 x 2.3 cm |
Kokonaispaino | COFDM-908T |
Vastaanottimen erittely
Konetelineeseen asennetut monikaistaleveyden HD-vastaanottimen parametrit | |
Vastaanottotaajuusalue | 170-860MHz VHF&UHF |
taajuuskaistanleveys | 2/3/4/5/6/7/8MHz, valinnainen |
RF-tulotaso | -94dBm ~ -15dBm (8M kaistanleveys)/-98dBm ~ -15dBm (2M kaistanleveys) |
RF-impedanssi | 50 ohmia |
RF-tuloliitin | N-pää |
demodulointitila | COFDM |
konstellaatiotila | QPSK, 16QAM, 64QAM (valinnainen) |
etenevän virheenkorjauksen | 1/2, 2/3, 3/4, 5 /6,7/8 (valinnainen) |
operaattorin numero | 2K, |
suojavälin | 1/32, 1/16, 1/8, 1/4 (valinnainen) |
videon dekoodaus | MPEG-2MP@ML/H.264 |
kuvasuhde | 4: 3 16: 9 |
videokuva on | 720 * 576 @ 8MHz 1080P @ 60P |
äänilähtötila | stereot epätasapainossa 300 / 200mv |
äänen ulostulo | lähtö2Audio + 2video ulostulo |
käyttöjännite | AC220V / DC12V <0.5A |
Käyttölämpötila | – 20℃ ~ + 50 ℃ |
Ulkonäkö koko | 480*260*45 (1U) alustan |
laitteen paino | 1.5kg (kaksisuuntainen kieli 2,5 kg) |
Huomautus: oletusliitin on HDMI, jos tarvitset halvemman mallin, liitin CVBS Yellow -videoliittimelle 720p HDMI, ole kiltti Tarkista täältä COFDM-908T.
Kuvaus:
– Tämä laite käyttää COFDM-tekniikkaa, joka integroi lähetysantennin, digitaalinen modulointi, audio-, COFDM-908T.
– Kompakti koko, pieni lämpö, ja pitkä lähetysalue
– yhteensopiva pienen kameran kanssa, voisi mahdollistaa HD-kuvan kaappaamisen ja lähettämisen
– lähetysalue on pidempi, jos se käyttää suuren vahvistuksen antennia
– Lähetysalue: 5000m (ilman keskeytyksiä)/500M esteet keskeytyvät
ominaisuudet:
– Kompakti koko, modulaation suunnittelu
– Hyväksyy COFDM-modulointitekniikan, MPEG-2-kuvan pakkaustekniikka
– Monisuuntainen viestintä
– nopea tiedonsiirto mahdollistaa reaaliaikaisen ääni- ja videolähetyksen
– Iskunkestävä alumiinikotelo
– NLOS-lähetys
tekniset tiedot:
Lähetin:
– Koko:90x64x23mm
– paino:200g
– antenni:22mm
Vastaanotin
– koko: 87x70x20mm
– paino:200g
– Antennin korkeus:42.5cm (voisi vääntyä)
Tekniset ominaisuudet
– modulaatio: COFDM
– käyttöjännite: DC11V-DC13V
– työvirta:0.5W: alle 0,6 A @ DC12V
– ohjausportti: standrad RS232 -portti. 8-bittidatabitit, 1-bitti stop bitti, baudinopeus:19200, tukea pariton pariteettitarkistusta
– siirtotietoportti:8 bittidatabitit,1 bitti stop bitti, baudinopeus,1200,2400,4800,9600,19200,38400,57600,115200,230400
– salaus: tuki 128 salaus
– modulaatio kartoitus: QPSK (4QAM),16QAM,64QQAM
– Forward error correction: 1/2,2/3,3/4,5/6,7/8
– Suojaa väli: 1/32,1/16,1/8,1/4
– Operaattorin numero:2K
– kaistanleveydellä:2/3/4/5/6/7/8M säädettävä
– kuljetusvirta:2000kbps-20000kbs säädettävä
– lähetysteho: 2W
– lähetystaajuus: voidaan räätälöidä, askel on 1Mhz
– tehon tasaisuus: alle 0,2 dB 10 MHz: n sisällä
– toinen harmoninen: alle -45db
– LISÄÄ:32db
– tulovideo:1Vp-p,75ohmi
– Video-ohjelman muoto: MPEG-2-
– Videon laatu: 720×576 kun yli 4 miljoonaa
– Muoto: NTSC ja PAL voidaan asettaa
Vastaanottimen tekniset tiedot:
– Vastaanottimen taajuusalue: 170-860Mhz, VHF ja UHF
– kaistanleveydellä: 2/3/4/5/6/7/8 Mhz, säädettävä
– RF-tulotaso:-94dBm-0dbm nopeudella 8M / -98dbm-0dbm 2M: ssä
– RF-impedanssi: 50ohmi
– RF-tuloportti: high School
– modulointi: COFDM
– Tähdistötapa: QPSK,16QAM,64QAM valinnainen
– Forward error correction: 1/2,2/3,3/4,5/6,7/8 valinnainen
– Operaattorin numero:2K
– Suojarako:1/32,1/16,1/8,1/4
– Näytönopeus:4:3,16:9
– videokuva:720×576 @ 6Mhz
– Audio- ja videolähtöportti: standardi 3.5 portti
– käyttöjännite: DC12V 0,3A
Paketti sisältää:
– 1 x lähetin
– 1 x vastaanotin
– 1 aseta x lisävaruste
30Km long distance COFDM HDMI Wireless Video Transmitter
FAQ
kysymys 1: Tarvitsen vähintään 30 kilometrin etäisyyden ilmasta maahan UAV UGV USV:lle.
Vastaus 1:Järjestelmämme tukee sitä, sen tulisi käyttää 2 W: n tehovahvistinta, on parempi käyttää erityistä pitkää lähetinantennia ja kahta korkeampaa vastaanotinantennia.
COFDM-912T VS COFDM-908T
kysymys 2: Kuinka pitkälle pääsen, jos käytän sekä lähetintä että vastaanotinta maassa?
Vastaus: Maakäytössä, lähettimessä ja vastaanottimessa on oltava tietty korkeusero pitkien etäisyyksien lähettämiseksi.
Pisin etäisyys on vain 2.5 kilometriä, jos lähetin ja vastaanotin ovat samalla korkeudella maassa. Katso testivideomme; koska lähetin ja vastaanotin sijaitsevat eri tasoilla, toinen puoli on vuorella, toinen puoli on meren rannalla, käytimme oletusarvoisia kahta wattia lähettämiseen 27 kilometriä.
kysymys 3: Tukeeko se työympäristöä -20 astetta?
Vastaus: Joo, tuettu
kysymys 4: Haluan ostaa moduuleja ja sisäänrakennettuja laitteitani, kerro minulle näiden moduulien mitat.
Vastaus: SD malli: 6X7x1,6 cm, HD malli: 5X7x1,6 cm
kysymys 5:Do you have any special case shells for marine use?
Vastaus: Joo, Tarkista alla oleva kuva. (For the transmitter with a three-proof shell, vedenkestävä, iskunkestävä, anti-salt spray, 防水,防震,防盐雾)
Precautions for order customization
- Taajuus: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- antennin pituus: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 tai 1.8 meters optional)
- Antenna type:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.
UKK
Q. What is the video resolution?
A: HDMI 1080P.
Q. Does the transmitter power current is high?
A: varten Lähetin, the different PA (vahvistin) sisällä, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
varten Vastaanotin, the current is only 0.3A (300mA)
Q: Like we only need 10km, how much PA is recommended?
A: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 kilometriä. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
A: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
A: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610Mhz).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
A:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
A: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
Esimerkiksi, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, jne.
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 metriä.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
PA | THE | NLOS |
500mW | >10Km | <300m |
1W | >30Km | <500m |
5W | >60Km | <1500m |
20W | >120km | <3000m |
50W | >200Km | <5000m |
100W | >250Km | <10Km |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50P. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. Esimerkiksi, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 tuntia.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Because COFDM is a one-way transmission, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. That is to say, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- Joo, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
- Joo, we can build the transmission of telemetry and video in COFDM-908T.
- Ensimmäinen, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 wattia. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Here are some correspondences between the output power and the dBm parameters displayed by the instrument.
- 20mW is 13dBm
200mW is 23dBm
1 Watts is 30dBm
2 Watts is 33dBm
5 Watts is 37dBm
10 Watts is 40dBm
20 Watts is 43dBm
50 Watts is 47dBm
100 Watts is 50dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
Joo, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080Konfiguroitavissa välillä 1MHz - 8MHz, 1080Konfiguroitavissa välillä 1MHz - 8MHz
Tällä hetkellä, it does not support 1080i, nor does it support 4K transmission.
20km meren yli HDMI langattoman videolähettimen ja vastaanottimen testaus veneeseen tai rannalta laivaan
Long-range 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply
Arvostelut
Ei arvosteluja vielä.