IP mesh ad hoc transceiver OFDM Transmitter and receiver Wireless Video Data Transmission for UAV Drone IP camera
IP mesh ad hoc-senderontvanger OFDM-senderontvanger Draadlose videodata-oordrag vir hommeltuig IP-kamera
INHOUDSOPGAWE
Installed on the Drone
Product Overview
This system adopts a new type of sub-broadband “wireless networking” based on point-to-point, punt-tot-multipunt, and AD-Hoc networking. As a mobile center organization network, Vcan1401 is a central, versprei, multi-hop aflos, dinamiese roetering, strong invulnerability, and good scalability wireless broadband system. It uses its own routing protocol internally. Jump forwarding completes wireless communication between nodes. 'n Ad hoc verspreide breëband draadlose netwerk transmissiestelsel met 'n doeltreffende MAC laag transmissie protokol en 'n twee-laag roetering protokol. It has excellent sub-broadband performance, strong anti-interference ability of system technology, hoë spektrum doeltreffendheid, lang transmissie afstand, anti-vervaag vermoë, en sterk diffraksie vermoë. Dit kan intydse en hoë kwaliteit draadlose tweerigting-data-oordragfunksies in komplekse en nie-siglyn-omgewings realiseer.
Facing the information communication transmission of drones, robots, and unmanned boat platforms in complex environments, ons volg die ontwerpbeginsels van veralgemening, modularisering, and standardization to realize high-speed real-time transmission of telemetry, afstandbeheer, and payload data from ground control stations to unmanned terminals on the water surface As well as the information collaborative interaction function between unmanned terminals, the system works continuously, stably and reliably for a long time.
Technical Feature
- After the central station is turned on, there is no need for complicated system configuration. After the on-site power-on, it will automatically form a network, en die kommunikasie kan in begin word “sekondes”;
- Arbitrêre topologie, multi-hop aflos, aflos aanstuur;
- Die logiese eienskappe van elke nodus kan buigsaam gekonfigureer word;
- Huidiglik, the same frequency network can support the interconnection of 1024 nodusse;
- Die kanaal is geïnkripteer met AES;
- The system data bandwidth peak value is 32Mbps;
Hardware description
- 1) Neem binnelandse self-georganiseerde intellektuele eiendom tegnologie aan, privaat netwerk, privaat kommunikasie-oordragprotokol, en unieke sinchronisasie kode.
- AES 128-bis enkripsie tegnologie: Nadat die inligting data deur AES geïnkripteer is, die inligting voor enkripsie kan nie verkry word nie;
- OFDM pilot and data position scrambling code encryption: The number of OFDM subcarriers is kept secret, the number of pilots is kept secret, and the position of the pilot is kept secret, making it impossible to obtain pilot information for channel estimation and frequency domain equalization; the change method of pilot and data position is encrypted In this way, illegal users cannot correctly distinguish pilot frequency and data.
- LDPC code word structure encryption: LDPC code word structure includes code length, information bit, and check bit; the position changes of information bit and check bit are encrypted, and illegal users cannot correctly distinguish between information bit and check bit.
- Gebruik veelvuldige enkripsiemetodes en modulêre ontwerp;
- Centralized and distributed, all nodes are equal in status, and can self-organize a network under complex conditions such as shielding non-line-of-sight (NLOS) en hoëspoed beweging, en besef TDD tweerigting kommunikasie;
- Support any network topology such as point-to-point, ketting, ster, ens, and can realize real-time interaction of multi-channel IP-based sub-broadband data, multi-serial port data, en ander multimedia-inligting;
- Multi-hop relay, elke nodus kan ewekansig en vinnig beweeg, and the route can be dynamically reconfigured when the system topology changes rapidly;
- Gerieflike ontplooiing, buigsame gebruik, eenvoudige operasie, gerieflike instandhouding, en volledige IP-ontwerp (ondersteun verskeie data deursigtige oordrag) make it easy to realize the interconnection of heterogeneous systems, especially suitable for wireless coverage transmission and wireless narrowband data networking;
tegniese Parameters
- Kommunikasie frekwensie: 1415~1465MHz (3G\2.4G), verstelbare;
- transmissie krag: 2*30dBm (2*1W), 1dBm step adjustable;
- Bandwydte-modus: 4 / 8 MHz;
- modulasie-metode: multi-draer TDD-COFDM;
- Draermodulasie: BPSK/QPSK/16QAM/64QAM (aanpasbaar of vas);
- ontvang sensitiwiteit: -110dBm @ 1MHz;
- Transmissie vertraging: ongeveer 2ms vir 'n enkele hop;
- Startup time: punt-tot-punt, point-to-multipoint≤5S (AD-Hoc start-up time 25S);
- Netwerktoegangstyd: minder as 1 tweede;
- Roetering skakeling: minder as 1 tweede;
- data-koppelvlak: network port x 2, RS232 x 2;
- Battery kragtoevoer: 12V / 1;
- Power consumption of the whole machine: 6~12W, standby 6W, receiving 8W, full load sending 12W;
- werk temperatuur: -40~ + 70 ℃;
- grootte: lengte: 73mm*width 47mm*height 10mm;
- gewig: 60g
Data Chart
modulasie |
1MHz Bandwidth (Mbps) | 2MHz
bandwydte (Mbps) |
4MHz
bandwydte (Mbps) |
8MHz
bandwydte (Mbps) |
BPSK 1/2 |
0.38 | 0.7 | 1.25 |
2.15 |
QPSK 1/2 |
0.9 | 1.6 | 2.6 |
4.5 |
QPSK 3/4 |
1.6 | 2.7 | 4 | 7.1 |
16QAM 1/2 |
1.8 | 3.1 | 5.3 | 9.5 |
16QAM 3/4 |
2.2 | 3.9 | 8 |
14.2 |
64QAM 2/3 | 2.8 | 5.2 | 10.6 |
19.5 |
64QAM 3/4 | 3.8 | 6.4 | 12 |
21.5 |
64QAM 5/6 | 4.2 | 7.8 | 13.5 |
24 |
Vrae meer
Q: Why does the radio transceiver seem to power on in seconds and power off always restart?
A: Please check the power supply, for the 2×5-watt PA inside, the power supply should be 16-26V at 4.5A. Maybe the power supply is not enough, then always restart. (2×1-watt or 2×2-watt need 12-18V)
Q: Why can’t I connect the transceiver radio device via web cable or get a ping feedback?
A: The default IP address of the two-way radio transceiver is 192.168.17.1.
Please make sure that the IPV4 address of your computer is the same net segment, byvoorbeeld, 192.168.17.xxx.
Please set the default gateway of the IPV4 address is 192.168.17.1.
Q: Does your mesh two-way transceiver module support changing the frequency (kanaal) via the UART AT command?
A: Ja, please type the below commands at the serial port tool.
AT-API+ set
wlan.radios.0.name phy0
wlan.radios.0.txpower 30 (power amplifier, 30 means 2-watts)
wlan.radios.0.bandwydte 10 (frequency bandwidth)
wlan.radios.0.kanaal 2 (channel)
END-AT-API
(The numbers 30, 10, en 2 of the above command should change to what you want the number. )
Q: Does the radio support frequency hopping/ changing dynamically?
A: We have many models that support the frequency hopping function (FHSS). The cost is different.
The model you bought does not support frequency hopping. You can choose the frequency from the below picture. (Choose from the web page or AT commands)
Mesh Radio Transceiver Support Channel Frequency range
Q: Can I modify the less transmission power?
A: Sekerlik. When you are testing the sample on the function except for the real transmission range, it is better to change the less transmission power in the lab.
20mW is 13dBm
200mW is 23dBm
1 Watt is 30dBm
2 Watt is 33dBm
5 Watt is 37dBm
10 Watt is 40dBm
20 Watt is 43dBm
50 Watt is 47dBm
100 Watt is 50dBm
Q: Can the web interface contain only the English language?
Now it supports English and Chinese.
Q: How many nodes the mesh architecture can support?
A: Supports up to 32-node networking. Too many nodes will cause high system overhead and the network will be very unstable. oor die algemeen, a dozen nodes are recommended.
Q: Is the relay function available in this modem? if yes then how many hops possible?
A: Support relay function. Max 5 hops in the one line.
Q: Can we decrease the data rate to increase the range?
A: Ja.
Q: Does the frequency band support 2280 Mhz to 2380 Mhz?
A: The frequency band can not meet your demand now. Only 2310-2380Mhz is available.
Q: What about the encryption? Do you provide by default encryption details?
Q: Please show us the drawing for hole positions and size of the 2×1-watt PA model.
Q: At this mesh IP radio, the new unit will be auto-joining my networking, how can we set authorization and protect our privacy?
A: If you have three or four robots, those who walk in the middle will serve as relays or repeaters for those who walk in the front. If you have three or four units, they can be auto-forming networking, so setting passwords is very important.
Kyk na die onderstaande foto.
Aflaai
Vcan1401 mesh version serial port AT setting routine description.pdf